RE: Cached views showing as out of date
Hi Rob, I'm at a bit of a loss as this isn't anything I've directly experienced myself. Has this always been the case when using DVs, or is it a more recent development? I'm assuming that when opening...
View ArticleCached views showing as out of date
I am currently caching my dynamic views as per the best practice wherever possible however iam finding that sometimes (not all) as soon as i cache a view it shows as being out of date and the view...
View ArticleRE: Stair construction AECOsim(08.11.09.863)
Ah... I see. When attempting to modify any of the Tread properties there are no warnings or messages, but the changes do not propagate either. When attempting to change the height of this delivered...
View ArticleStair construction AECOsim(08.11.09.863)
I'm creating stairs with validation turned on and I'm running into a problem when I attempt to modify the stair after it is placed. I'm starting with a Steel Egress stairs, all default settings except...
View ArticleRE: Drawing Extraction Recalculation
Hi Henry, Sure.... The delivered help includes topics for both DEM and DVs under ""forward sensitive distance", but essentially it's a way to display symbols/openings/annotation for elements that are...
View ArticleDrawing Extraction Recalculation
I have been recalculating existing extractions but I experience a lot of missing graphics from the cuts. Does anyone one have an idea what generally causes this problem and if there are any recommended...
View ArticleRE: AECOSIM V8i Select 6
Not sure about *.BIMG. Command is the same 'render image to file' but under visualization tab (Q+3). I am simply exporting my screen image in jpeg (2D), straight to my drive, with no issues, until i...
View ArticleRE: AECOSIM V8i Select 6
OK, so that's not the Luxology interface. What kind of images are you trying to capture? Are these rendered 3D section views or 2D cuts?
View ArticleRE: AECOSIM V8i Select 6
Hi Marc, Yes, i think they are not... I am exporting 2D JPEG from a 3D section (perspective view-wide) So far, after several times trying, i noticed that the Workstation does not get overloaded with...
View ArticleRE: Printing Clash Detection View as a 3D PDF
Nick, Please check the settings in your pdf.pltcfg file and make sure it's not set to Monochrome, etc. Also, make sure there is no Default Print Style being applied which would provide these settings....
View ArticlePrinting Clash Detection View as a 3D PDF
Hi,I have been attempting to create 3D PDFs of a clash detection view, however the 3D PDF always reverts back to the standard view (wireframe, illustration etc.) rather than showing the clash detection...
View ArticleRE: Change the elaps number in multi drawins
hello, sorry for to late i was on my annual vacations , dear i am using AECOsim building designer ss4.
View ArticleChange the elaps number in multi drawins
Hello Friend,i am working in project files and i have multi files/views in one drawing and have the different contnue number like sheet 01 of 100. so i just add one more sheet in between the sheets so...
View ArticleRE: Convert Region to Slab
More or less OK, I have a slab although a couple of the small round penetrations are missing. I'll take another look at it in the morning. Just curious, have you considered using the 'Place Wall or...
View ArticleClik here to view.
RE: A Wall does not connect with 2 comulmns
Hi. Thanks for your reply.To answer your question, i did do the same with connecting between the column and the beam. It is OK, guy. Like below picture.Any though?Thanks.
View ArticleRE: A Wall does not connect with 2 comulmns
Hi Sang,As Marc suggested it is structural snap that is causing this with wall. If you toggled OFF structural snaps, things will work for you.Please see attached video.HTH,Thanks,Sandeep(Please visit...
View ArticleRE: A Wall does not connect with 2 comulmns
Hi Sandeep! I got your points. But i want the wall connect to the columns at both side, not one side like u did in your video when we turn on structural snap. And in the case, you turn off the...
View ArticleClik here to view.
RE: A Wall does not connect with 2 comulmns
By the way, to show specific my point. see below picture, please!Thanks you guys!
View ArticleRE: A Wall does not connect with 2 comulmns
[quote user="Marc Thomas"]If your columns were both placed by a corner and Structural Snaps are On the wall between them will snap to the Column placement points. [/quote]If this is the case, then...
View ArticleRE: A Wall does not connect with 2 comulmns
Hi Dominic, Placement by centreline is an existing option. Centrelines can be generated on the cut plane in drawings when selected in reference presentation or if pre-set in the Drawing Seeds. If you...
View Article