Clik here to view.
RE: Filling ductwork with system colours.
Hi Azhar,If I understand what you'd like to do, I think the simplest method may be to create a custom Display Style whose Display mode is set to either Filled Visible Edges or Shaded, depending on how...
View ArticleRE: 2d symbol of Extract Diffusers and Ducts are overlapping
thanks steve, diffuser symbol will not appear in isometric view, the screenshot is from my sheet model, actually i referenced a saved view into my sheet model.
View ArticleClik here to view.
2d symbol of Extract Diffusers and Ducts are overlapping
2d symbol of Extract Diffusers and Ducts are overlapping...how to keep only one symbol?
View ArticleRE: Windows 10
Hi,yes, the latest Version of ABD is certified for Win10. You can download the Readme from here: Read Me for the AECOsim Building Designer SELECTseries 6 Update 1 (V08.11.09.866) Commercial Release or...
View ArticleWindows 10
Will AECOSim run under Windows 10 yet?Where do I find the README file that is supposed to tell me?
View ArticleRE: Stair Display Control
Hi Mark, Thanks for the feedback, sorry for the late reply. We ended up turning off all we could and drawing over in 2d the information we need to suit our office standards. It would be great if we had...
View ArticleClik here to view.
Stair Display Control
Hi All,I am looking for a way to control the drawing symbols for the stairs. we are looking for a simple clean stair in plan and have currently turned off all the annotation for the stairs, however...
View ArticleRE: AECOsim extractions not using centreline symbology from dataset correctly...
Hi Ian, I believe you already resolved this by compressing the file? I was going to say that I tried on AECOsim SS5 and SS6 and couldn't reproduce the issue but if you no longer have the issue that is...
View ArticleClik here to view.
AECOsim extractions not using centreline symbology from dataset correctly...
Good morning all,pulling our hair out with this one so any help at all much appreciated..!We have some walls using a centreline symbology to apply some insulation when we run an extraction (DEM..I know...
View ArticleSet Presentation for Nested References
Microstation V8i (SS2) V - 08.11.07.443 Projectwise (SS2) V - 08.11.11.443Hi All,In my reference manager, i have a particular nested reference i am trying to change its display styles from wireframe to...
View ArticleRE: 2d symbol of Extract Diffusers and Ducts are overlapping
I think Steve means a view on your 3D model which shows the relative position of your elements and the position of the saved view.
View ArticleRE: Plumbing - Sloping the pipework.
It seems to be working OK here with the delivered UK dataset.(Please visit the site to view this video)Does it work with any file/combination of components?
View ArticleClik here to view.
Plumbing - Sloping the pipework.
Hi there,I am trying to apply slope to a pipework but it applies the slope to only one pipe which I select; although I have checked 'Continue Through Risers' (snapshot attached) but still it applies...
View ArticleRE: 2d symbol of Extract Diffusers and Ducts are overlapping
Exactly, Stefan. I'd like to see how the Callout is placed in relation to the geometry, and how the components themselves are placed in relation to each other.
View ArticleRE: Issues with Rectangular Duct Takeoffs - ABD 829
Hi John and Jeff, Just a quick note to let you know that defect # 344874 should be resolved in the upcoming ABD CONNECT Edition v2, tentatively scheduled for January. Merry Christmas! :)
View ArticleClik here to view.
Issues with Rectangular Duct Takeoffs - ABD 829
I've been having quite a few issues with trying to place a rectangular takeoff on the bottom of a duct. The main duct is 1500mm X 900mm and the takeoff branch I want is 1600x450 (see top image).As you...
View ArticleRE: "Join With Takeoff" Creates Wrong Size Take-Off in Ss6
Hi Jeff, Just another update.... Look for the upcoming ABD CONNECT Edition v2 release for a few more fixes in these areas; e.g., branch vs. main size, unlined duct end spec, insulated take-offs, etc..
View Article"Join With Takeoff" Creates Wrong Size Take-Off in Ss6
When joining unlined branch duct to lined trunk duct with "Join With Takeoff", the takeoffs generated are the wrong size. Also, a transition gets generated to attempt to make up the difference in...
View ArticleClik here to view.
The custom label in structual rule show a wrong value after cutting the model?
I defined two custom labels in structual rule, the 1st one named Length with the attribute of "Length", the 2nd named SectionName with the attribute of "SectionName".Then I draw a simple beam to...
View ArticleIfc parts all on default level
I have an ifc part family with several dozens of parts like ifcdoor. But they are ALL set on DEFAULT level !?Is that correct?Does someone have a collection of parts with better levels to share?//Thomas
View Article