Sorry for this question, but I cannot edit the height of a curtain wall in ABD Update 4. I can edit the different components but not the height of the whole curtain wall.
Thank you
↧
How to edit the height of a curtain wall in ADB Update 4
↧
Jumping Updates
quick question , can you jump updates and go to the latest without installing all of them in order
eg. from update U3 ( connect edition ) then the next install is the up coming U6 ( connect edition )
↧
↧
OBM-U5 - Column Rotation Interaction
Anyone else having issues with the Interactive toggle for column placement rotation?
Seems to work once then I have to turn it off then on again to get it to work.
↧
[OBD U5] - Defect 891858 status
Hi,
Just wondering if defect 891858 as described in the post below been fixed in U5?
Best regards,
Tuan Le
↧
[OBD U5] Defect 358201 status
Hi,
Just wondering if Defect 358201 has been resolved in U5?
Best regards,
Tuan Le
↧
↧
[OBD U5] Ctrl+O at OBD start up
Hi,
What does Ctrl+O do in U5 at start up? I would have thought that would be equivalent to pressing the Browse button, but it's not. It seems it's a short cut key to load IMODELATTACH. Any chance I can change that behavior?
Best regards,
Tuan Le
↧
ribbon customisation
I cannot find that button in the customisable list. Where is it?
I wish to add the Building element info button to either the quick start or drawing ribbon
↧
[OBD U5] merged DV elements vs DEM cells
Hi,
Is there any setting to make a merged DV to retain the information relating to its original 3D elements, like DEM? At the moment when I merged a DV, all elements are blown to bits like what you'd get from a visible edge extraction. Where as with DEM, each 3D element will be converted each individual cell.
Best regards,
Tuan Le
↧
Converting solid models to structural elements
hi, I am using aecosim ss6. I have some models that have been done as smart solids but I need them as structural elements is there a way of converting them or do they have to be remodelled from scratch?. We need to export them as an IFC to obtain the volumes in solibri.
↧
↧
[OBD U5] S (startup) switch does not seem to work
Hi,
the S switch is still listed in the help file:
However, it doesn't seem to do anything. Attached is a startup file that I've tried successfully in SS6. Is that a defect?
Best regards,
Tuan Le
↧
[OBD U5] Migrating shortcut.txt
Hi,
Is there any way or tool to migrating from the SS shortcut.txt to the corresponding xml file in CE?
Best regards,
Tuan Le
↧
[OBD U5] MS_WORKSPACEOPTS equivalent in CE
Hi,
Just wondering if there's an equivalent to MS_WORKSPACEOPTS in CE? Otherwise, what is the recommendation to prevent user changing a programmatically selected workspace and workset?
Best regards,
Tuan Le
↧
[OBD U5] MS_DGNLIBLIST vs MS_DGNLIBLIST_*
Hi,
What is the use for MS_DGNLIBLIST in CE since it doesn't seem to be used by any other variables in the default config? It seems in CE each type of DGNLIB (text styles, levels etc.) are now handled directly by various MS_DGNLIBLIST_* variables. So is MS_DGNLIBLIST still required?
Best regards,
Tuan Le
↧
↧
Changing material on doors does not affect the render of illustration view of doors
Hi,
I'm struggling a little with the catalogue editor. I have duplicated the catalogue item A-Doors-DoubleFlush and created variations of this with a suffix determining the material I.E. A-Doors-DoubleFlush-Glass. On each catalogue item I have changed the definition and property to the material of the door, however, this has not changed the render of illustration of the door, resulting in a timber, glass and steel doorset all looking the same. Also family and parts cannot be added to doors, or i'm failing to find out how to apply parts to doors.
Any assistance or help welcome. Thanks.
Sam Wilson
↧
Configuration explorer (ce) and OBD (ss5)
BCE 10.0.0.11 and OBD 10.5.0.49
"process configuration" runs
the "variable explorer" doesn't seems to work anymore,
a blanc screen opens with nothing visible
file history, event history and validators are doing all well
am I missing something, or is 1.0.0.11 not yet compatible with ss5
win10_1903
↧
Edit Time Audit
Does OpenBuilings and/or Microstation have a function to audit the edit time of a specified model?
↧
image repath read only, How do I get it readable?
Hello,
I had to export a sheet from Revit to DGN. This sheet has several references that are images. When I open the exported DGN file the Raster Manager shows everything as undefined. I use to be able to right click and select File Name from the flyout and change the location. For some reason this DGN is saying it is read only and File Name will not let me change.
How in the world do I get it to allow me to change the path or become readable so File Name works as I remember it?
I tried to double click the check mark beside the image in Raster Manager, In the properties under Image change the Read Only to False and nothing worked.
Thank you for the help
↧
↧
[OBD U5] making vba readonly
Hi,
How do I make loaded vba projects readonly by default in U5? IE, projects are loaded and open from memory rather than disk. MS_VBASAVEONRUN is already set to 0.
Best regards,
Tuan Le
↧
Save level combination (On/Off)
Hi all,
Is there any way to save my Level combination (On/Off) without having to create a Saved view?
Would it make sense?
Thank you
↧
Electrical Design file setup error
I have tried to resigster Electrical Design Setup. But facing Following error.
How to check Configuration path and Setup
↧