Mechanical Keypoint Snaps are Non-Present in Ss6
Here's another Ss6 single issue on my list that makes Aecosim Ss6 completely not usable.Mechanical keypoint snaps are non-present. The only exception is when placing new duct/pipe. When editing...
View ArticleRE: Flex Pipe and Flex Duct Issue with AccuDraw Compass - ABD 863
Hi Steve, I tried your suggestion of restoring preference defaults, but the problem persists; The accudraw compass projects to the active ACS plane instead of begining at the pipe/duct end. I need this...
View ArticleFlex Pipe and Flex Duct Issue with AccuDraw Compass - ABD 863
When drawing flex pipe/duct from end of existing pipe/duct the accudraw compass projects to the active ACS plane instead of begining at the pipe/duct end. Both ACS Plane and ACS Plane Snap locks are...
View ArticleRE: Setup ABD with no project
Hi Marc, The SWA rule is what we will stick to using ABD default seed UOR and mixing MicroStation default seed UOR, relocating GO. By using the suggested workflow of p and w drives according to quick...
View Article"DL=" Now Relative to AccuSnap Point in Ss6
In Ss6 there is an issue with the keyin "DL=", "DX=", etc. moving things relative to the accusnap tentative. (“Move”, “Copy”, or “Move Component” command etc etc). …Considering the difference between...
View ArticleRE: Add Instance Data - F+P definition / what does 'Use Model Properties' do?
Hi Stefan, For the first item, this was logged as Enhancement 184637: “Add Instance data tool” should apply Family and Part For the second item, it's not something I've ever had reason to use myself,...
View ArticleAdd Instance Data - F+P definition / what does 'Use Model Properties' do?
1. When using the Add Instance Data tool, I noticed the data is added, but it does seem the Family and Part as defined in the DG Catalog Item isn't used.Is there a reason for that? It's not logic you...
View ArticleRE: IFC import
Hi Rob, I've created a Share File folder here that you can use: bentley.sharefile.com/r-r3d53cf771eb412da
View ArticleIFC import
I'm importing a multi-storey structural model from IFC. On all storeys but one the imported file shows the holes in the slabs for stairs, lifts, risers etc but on one floor there only appears a solid...
View ArticleClik here to view.
CR: Add Instance Data tool Cell/Nesting
It would be good to enhance the Add Instance Data tool so that it can tunnel into cells.The lack of this capability is a big problem for BIM workflows. BIM is predicated on a progressive building in of...
View ArticleRE: Unable to Create a Drawing/Sheet Model
Hi, thanks for your suggestions. I have full permissions on the folders and have no problems saving and editing files within the folders. I am also trying to save them as .dgn. I am trying to save it...
View ArticleRE: Unable to Create a Drawing/Sheet Model
Hi Nathan,Please can I suggest that you download Bentley Configuration Explorer and run it on your system.Once installed, click on Home tab > Process Configuration.Pick the appropriate Application,...
View ArticleUnable to Create a Drawing/Sheet Model
I am unable to generate a drawing model or sheet model from the discipline model I have worked on. Every time I select the button to "create new drawing file" the save box comes up but when I have...
View ArticleRE: CR: Add Instance Data tool Cell/Nesting
Hi Dominic, did you log an SR? If so please post the number so we can follow up.
View ArticleRE: AECOsim - Microstation 3D : Unable to extract 2d from Multiple Planes...
Inside AECOSim it's possible to create steps in plans and sections diferent from 90º? Thanks & regards
View ArticleRE: Mechanical Keypoint Snaps are Non-Present in Ss6
But there is a problem, and it's worth more than a short try...(don't get me wrong; I appreciate your reply)Attached is a DGN file where I've set up 2 exercises that should demonstrate the Mech...
View ArticleApply Part to Multiple Elements
Can someone tell me hot to Apply Part to multiple selected elements at once? Is this even possible? Both the Building Element Info window and the Apply Part dialog only let you select and apply one by...
View ArticleNo 3d in dwgs from ADT
HiI have dwgs from Archtitectural Desktop that they say are 3d - but I only see 2d in ABD.Anyone else?
View Article