problem with level manager
until few days back everything was normal but now when I create a new level or rename an existing one and save the file it does so but when upon reopening the file renamed levels are reverted to...
View ArticleCut Solids by Curves - change depth of recess
I have a structural slab that has openings and recesses in it, created using the "cut solids by curves" tool.I need to change the depth of the recess, I have tried stretching them, but with no success....
View ArticleRE: ABD CE EA 16Q4 ETA?
Anywhere before January first 2017 is still 16Q4. I understand that you can't wait to see where they're going with ABD CONNECT though. If it's just a port of the existing tools or a real remake that...
View ArticleRE: Dynamic Views are slow and complicated
Thanks, Larry. I'm not sure what happened when copying those links over, so I'll just blame the internet. :)
View ArticleDynamic Views are slow and complicated
I am trying to use the dynamic views on my current design project for a Waste Water Plant upgrade. It took a while but I figured out how to use them and setup the dataset so my drawings look like they...
View ArticleRE: Dynamic Views -- place sections on active model or sheet
Hi JWAM12, Would it work for you if you placed the section callout, chose not to auto-create the Drawing or Sheet Model, and then simply dragged the resulting Section from the Saved View dialog...
View ArticleRE: Flat Inline Damper, Three-Way Component Mix-Up, Ss6
Hi Jeff,I'm not seeing the same results, at least if I'm understanding the issue correctly...(Please visit the site to view this video)
View ArticleRE: Cut Solids by Curves - change depth of recess
Hi Doff, Can you elaborate on what you currently have and how those recesses need to be modified? Since the recesses created by the Cut Solid by Curve tool aren't parametric, the distance between the...
View ArticleRE: Flat Inline Damper, Three-Way Component Mix-Up, Ss6
Hi Steve,"...when flying over the 3 different duct shapes (rectangular, round, oval) prior to actual placement." You've got "Shape" selected in the Tool Settings palette. That means the damper will...
View ArticleRE: problem with level manager
Hi Ranjan, Have you made any recent configuration changes (or similar) that could account for the change? Also, please see if the Wiki article helps:...
View ArticleRE: problem with level manager
Dear Steve, I have removed duplicate level tables using following key in's MDL LOAD LEVELAUDIT LEVELAUDIT REPORT MASTERTABLES LEVELAUDIT CLEAR DUPLICATETABLES KEEPLOWEST LEVELAUDIT REPORT MASTERTABLES...
View ArticleRE: ABD SS6 - Updating dynamic views
Have you tried recording your steps using the VBA Macro Recorder? It does not always pick up all the commands but worth a try?
View ArticleABD SS6 - Updating dynamic views
Hi everyoneWe have one problem and we can't find a way to fix it in an easy way. We have one question about updating several files at the same time in an automatic way. I explain myself.We have a...
View ArticleRE: Very slow tools: View Attributes and Color Table
Thank you Marc for your feedback. I moved UPF locally with MS_USERPREF=C:\Users\UserName\AppData\Local\Bentley\AECOsimBuildingDesigner\UserName.upf I suppose using _USTN_USER is better and move all...
View ArticleRE: Very slow tools: View Attributes and Color Table
Hi Christophe,ABD is more demanding of the network so I strongly reccommend increasing the speed (everything else will benefit too!). Connection all your PC's via a cheap 8 or 16-port unmanaged network...
View ArticleRE: Very slow tools: View Attributes and Color Table
Marc, All our equipements (PC, printers, plotters,...) are connected to a 24-ports switch. By peer-to-peer i meant we don't have a server. Our shared files are stored on a NAS Synology Drive (DS509+)....
View ArticleClik here to view.
RE: Cut Solids by Curves - change depth of recess
Hi Doff,I have created a Paz cell for this type of cut if that is the type of cut you want to use, you can change all variables at the same time using the datagroup utility.you can have it if you...
View Article