RE: Very slow tools: View Attributes and Color Table
Hi Christophe, Ah OK, glad that was a misinterpretation! However, if your switch has primarily 100Mb ports I'd still recommend an upgrade to a 1000Mb switch. When launching AECOsim in MicroStation mode...
View ArticleVery slow tools: View Attributes and Color Table
Using AECOsim 08.11.09.866, GB dataset. I configured my workspaces on network shares ( following closely the -invaluable- Marc Thomas method, ABD Quickconfig...
View ArticleClik here to view.
RE: Very slow tools: View Attributes and Color Table
Hi Marc,Correction, the switch is Gigabit and our network is Gigabit too (i just made a test to check the file transfer: around 460Mbps)Here is a screenshot of View attributes / Saved...
View ArticleClik here to view.
RE: Very slow tools: View Attributes and Color Table
And here is the explanation.I don't understand why AECOsim Microstation need Drawingseed_Architectural.dgnlib ?Regards,Christophe
View ArticleClik here to view.
RE: AECOSIM Dataset Explorer - Hatch Patterns not working
JWAM12,Your parts were set to Cross Hatching, not Patterning:Once changed, the pattern does display within the drawing:
View ArticleRE: AECOSIM Dataset Explorer - Hatch Patterns not working
Michael, Can you upload your parts XML file?
View ArticleRE: AECOSIM Dataset Explorer - Hatch Patterns not working
That will not work for me. Once I switch to Patterning I get nothing
View ArticleAECOSIM Dataset Explorer - Hatch Patterns not working
Hi I am using AECOSIM SS6 and I am having issues getting hatch patterns to work from the Dataset explorer. At the moment I have the default NM dataset but I am also getting the same results from the...
View ArticleRE: Saved View in Sheet Not Displaying Correctly
Nathan, So when you view the same wall(s) in the 3D Model with a shaded display style, the bricks do display at the expected scale and not like the drawing? If so, what happens if you place a Callout...
View ArticleClik here to view.
Saved View in Sheet Not Displaying Correctly
I have a saved view referenced into a sheet, but as you can see the brick finish is stretched on the page, how can I get it to display as it appears in the model (a normal size). Is there anything...
View ArticleRE: "Join With Takeoff" Creates Wrong Size Take-Off in Ss6
Hi Jeff, We're looking into this...
View Article"Join With Takeoff" Creates Wrong Size Take-Off in Ss6
When joining unlined branch duct to lined trunk duct with "Join With Takeoff", the takeoffs generated are the wrong size. Also, a transition gets generated to attempt to make up the difference in...
View ArticleRE: "Move Component", Broken Tool for Duct, ABD Ss6
Hi Jeff, I'm just not able to reproduce that... every piece of round duct I tried moved as expected. Just to be sure though, are you using the original Ss6 release (.829) or Update 1 (.866)?
View ArticleRE: Concatenate Labels, Pset, Export to IFC
Hi Oskar, Just so we better understand, what is the end result you are trying to achieve once the data is in IFC format?
View ArticleConcatenate Labels, Pset, Export to IFC
HelloI would like to concatenate ArchSpace/@label and ArchSpace/@label2 on the export to IFC.In IFC_Mapping_overrides i have:TYPE Space PROPERTY_SET BIP "Area" : "IfcLabel" =...
View ArticleClik here to view.
RE: Animation Producer Schedule Animations to Create 4D Animations Available...
Hi Gilberto,I had to go back to check, but yes, those tools are in the same location as later versions:
View ArticleAnimation Producer Schedule Animations to Create 4D Animations Available on SS4?
HiIs the Animation Producer / Schedule Animations Available on AECOsim SS4?RegardsGilberto
View ArticleRE: "Move Component", Broken Tool for Duct, ABD Ss6
Hey Steve,I'm using Update 1 (866).Really? Are the ducts you're testing connected with a takeoff at one end and elbow at the other end?Here's a video showing the problem. If the duct has one end not...
View ArticleRE: Question on AECOsim
Steel sections are defined in the xml files in the Dataset\data\ folder. There is an Excel sheet in that folder that shows you the different types (= shapes) you can define, and which parameters are used.
View ArticleQuestion on AECOsim
hello support,we have the following two problems on AECOSIM software.1) While modeling in Advance Steel, there are sections to select. And in Thailand, we have TIS Standard (closely to the Japan...
View Article